FJ CRSR Cowl — Baja Designs S1 15° Angled Left + Right Bundle

VNTR WORKS

$249.00 USD

Sale Sold out

Shipping calculated at checkout.

Free international shipping on orders $299+.
Ships from the United Arab Emirates.

Left + right cowl bundle. Baja Designs lights are NOT included.
Choose antenna position, hood-hinge bracket clearance and finish below.
Not sure? Use VNTR Guided Setup →

How to Choose the Correct Variant

1. Antenna position
Choose the physical antenna location on your FJ Cruiser: right side, left side, or Antenna Delete. This is independent of LHD/RHD and country.

2. Ditch-light bracket clearance
This refers only to classic external ditch-light brackets mounted at the hood hinges beside the cowl / A-pillar. Choose no clearance, left side, right side or both sides based on the brackets physically installed on your vehicle.

3. Finish
RAW / Unpainted: untreated raw 3D-printed ASA-CF surface. Customer preparation / finishing is required for a finished cosmetic appearance.
Primed & Sanded / Ready for Paint: surface prepared for your final paint.
OEM Paint Matched: finished to the paint code you provide with the order.

Baja Designs lights are not included and must be purchased separately.

Toyota FJ Cruiser Paint Code Examples

040 — Super White
058 — Iceberg / White
1D4 — Titanium Metallic / Silver Metallic
1F7 — Classic Silver Metallic
1G3 — Magnetic Gray Metallic
1G6 — Silver Fresco Metallic / Gray Metallic
1H5 — Cement Gray Metallic
202 — Black
211 — Black Diamond Mica / Black Diamond Pearl
3L5 — Radiant Red
3P2 — Black Cherry Pearl
3R8 — Brick Red
4U0 — Sandstorm
4V6 — Quicksand / New Beige
4W2 — Magma
5A3 — Sun Fusion
6V7 — Army Green
8R8 — Light Blue Mica
8T0 — Blazing Blue Metallic
8T6 — Voodoo Blue
8W2 — Cavalry Blue / Grayish Blue
8X0 — Heritage Blue / Smoky Blue

Please verify your Toyota OEM paint code on the vehicle before ordering.

Technical Specifications

Material: Carbon-fiber-reinforced Acrylonitrile Styrene Acrylate (ASA-CF), selected for UV resistance, heat resistance and exterior automotive applications. Vehicle Application: Toyota FJ Cruiser Light Compatibility: 2 × Baja Designs S1 Recommended Lens: Baja Designs S1 Work Scene Lens S1 Orientation: 15° Angled LED Lights Included: No — Baja Designs S1 lights must be purchased separately. Bundle Quantity: Left + right cowl housings Finish Options: RAW / Unpainted — No surface treatment is applied after the manufacturing process. Surface ridges and minor unevenness may be present. Customer post-processing is required for a finished cosmetic appearance: sanding, primer, sanding and paint. Primed & Sanded / Ready for Paint — surface prepared for final paint by the customer. OEM Paint Matched — finished to the vehicle paint code supplied with the order. Installation: Uses the original FJ Cruiser mounting concept. No drilling, cutting or permanent vehicle modification required.

Scope of Delivery

Each bundle includes:
• 1 × left-side FJ Cruiser cowl housing
• 1 × right-side FJ Cruiser cowl housing
• 2 × integrated mounting interfaces for the compatible Baja Designs lights
• 2 × mounting hardware / installation kits

Baja Designs lights are NOT included and must be purchased separately.

Disclaimer

VNTR WORKS products are aftermarket OEM+ integration systems and are not affiliated with or endorsed by Toyota Motor Corporation or Baja Designs.

Baja Designs lights are not included with this product and must be purchased separately.

Professional installation is recommended. The customer is responsible for selecting the correct antenna configuration, bracket-clearance geometry, finish, proper installation and compliance with local regulations.

RAW / Unpainted parts require customer surface preparation / finishing for a finished cosmetic appearance.

Products are supplied according to the selected variant and finish. Product appearance and surface texture may vary slightly due to small-batch manufacturing and material characteristics.

Purpose-built OEM+ Baja Designs S1 integration for both sides of the Toyota FJ Cruiser.

The FJ CRSR Cowl Left + Right Bundle replaces both original cowl panels with vehicle-specific housings designed around the Baja Designs S1. The result is a clean, integrated lighting solution that follows the FJ Cruiser's original design language.

15° angled configuration

This version uses dedicated left- and right-side cowl geometries that hold the Baja Designs S1 lights at a 15° angle. It is physically different from the straight 0° bundle.

Configure it for your FJ

Select antenna position or antenna delete
Select ditch-light bracket clearance for no clearance, left, right or both sides
Choose Raw, Primed or OEM paint-matched finish

Key details

Dedicated left- and right-side Toyota FJ Cruiser cowl housings
Integrated mounting interfaces for Baja Designs S1 lights
Uses the original OEM mounting points
Integrated magnets, retainer brackets and M5 threaded inserts for additional security
No drilling, cutting or permanent vehicle modification required
Approx. 3/10 mechanical installation difficulty

Scope of delivery

1 × left-side FJ Cruiser cowl housing
1 × right-side FJ Cruiser cowl housing
Integrated Baja Designs S1 mounting interfaces
Mounting hardware / installation kits for both sides

Important: Baja Designs S1 lights are not included and must be purchased separately.

Lens recommendation: VNTR WORKS recommends using the Baja Designs S1 Work Scene Lens for this cowl integration.

Electrical installation

The S1 lights mount directly into the dedicated integration areas. Wiring depends on your existing switch setup, auxiliary switch system or preferred wiring configuration and is not part of the VNTR WORKS cowl system. Please follow the instructions supplied with your Baja Designs lighting components. Professional installation is recommended if you are not familiar with vehicle wiring.

Built to Endure.